BROWN ESD MAT ?

WHY WE NEED ANTI - STATIC PROTECTION ?

WHY SHOULD WE BE CONCERNED ABOUT THE IMPACT OF ELECTRO-STATIC DISCHARGE ?

WHY ANTI STATIC CARPETING FOR YOUR FACILITY ?

​REASON IS TO PREVENT TRIBOELECTRIC DAMAGING OUR MACHINES / EQUIPMENTS / ELECTRONIC PARTS etc

ElectroStatic Discharge Materials ( ESD Rubber ) - European Union ( EU ) RoHS Directive 2002/95/EC Compliant
Copyright © GSE ONLINE SDN BHD ( 1116968-P ) ALL RIGHTS RESERVED
BROWN ESD Mat
ESD RUBBER MAT MALAYSIA

A) Product Name
ESD Brown Rubber Mat

B) Raw Material :
NBR + Synthetic Rubber

C) Purpose
To prevent equipment damage resulted from triboelectric voltage of the static dissipative

D) Scope
Ideal for use for Workstations, Electronic Manufacturing, Pharmaceutical Plants, Cleanrooms, Fibre Optics, Electronic Assembly, Electronic Warehousing, Circuit Assembly, Aerospace, CMOS chips , microprocessor , semiconductor , dish drivers , composites , LCD screen product , circuit product line , hospitals and Pharmaceutical industries , precision instrument etc

E) Characteristics
1 ) The anti-static mat is made up of two layers , the top layer ( hard ) is static dissipative and the bottom layer ( soft ) in conductive .
2) Features :-
The anti static properties of mat are according with the relative requirements of SJ/T 10694-1996 .
The surface resistance of static dissipative layer ( 1.0 x 10e6 ~ 10e9 Ω )
The surface resistance of conductive layer ( Below 1.0 x 10e6 Ω )
Volume resistance ( 1.0 x 10e6 ~ 10e9 Ω )
Surface triboelectric voltage of the static dissipative material < 200 V
The time of static discharging below 100V should be less than 1 second .
3) Part / Model No. : ESD2BRO1X10D
4) Compliant to GB/T14437-97 .
5) RoHS compliant .
6) Top Layer Material : Brown ( NBR Rubber ) ,
Bottom Layer Material : Black ( Synthetic Rubber ).
7) Surface Resistivity :
a) Top ( 1.0 × 10 ⁷ ~ 1.0 × 10⁹ Ohms )
b) Bottom ( 1.0 × 10 ²~ 1.0 × 10⁶Ohms )

8) Hardness ( IRHD , Micro Hardness Tester Wallace )
a) Top Brown Layer : 70 ± 5° ( Shore A )
b) Bottom Black layer : 50 ± 5° ( Shore A )
9) Overall Thickness :  Minimum 2.00 mm
10) Surface Finishing : Matt ( Dull )​

F) Specification
1) Model No.: ESD2BRO1X10D , ~2mm ( Thickness ) x 1,000mm ( 1m ) ( Width ) x 10,000mm ( 10m ) ( length ) / roll , weight around 30kgs / roll , SGS Test Report : CRSSA/190411626-CA09973


G) Rate Offer & Order
​Disclaimer :
​* Note : Users need to evaluate suitability for their industries use ( applications ) before placing order from us .
Model No. : ESD2BRO1X10D
GSE ONLINE SDN BHD
** The photograph may not clearly reflect the exact color as listed due to the camera, the lighting and other factors such as your screen settings, and color may vary slightly due to the color calibration of each individual monitor
Antistatic Brown ESD Mat Malaysia Antistatic Brown ESD Mat Malaysia Antistatic Brown ESD Mat Malaysia Brown ESD Mat Malaysia GSE ONLINE SDN BHD GSE ONLINE SDN BHD Brown ESD Table Mat Quotation Malaysia