H) Order procedures 1) Cash & Carry ( ex-factory )
2) Formal PO issuance :- Step 1 ) , Issue PO and fax to ( 03-2178 4747 ) / e-mail to ( email@example.com ) . ( follow quotation number above in your PO , Leadtime : Within 1 ~ 7 working days ) ( * subject to GSe stock level )
Step 2 ) Contact / e-mail GSe Sales office for proforma invoice and payment arrangement in advance before collection .
HIGH TEMPERATURE RoHS 2 DARK GREEN ESD Mat , MAXIMUM withstand 150 ⁰ C , Phthalates-Free Homogeneous material
* If no reply after 3 Working Days from submission , please call Sales Dept .
A) Product Name High Temperature Dark Green ESD Rubber Mat , MAXIMUM withstand 150 ⁰C , Complied to RoHS I & II ( Phthalates-Free Homogeneous material )
B) Raw Material : 100% Natural Rubber ( No recycle / reclaimed rubber content )
C) Purpose To prevent equipments damage resulted from triboelectric voltage of the static dissipative
D) Scope Ideal for use for Workstations, Electronic Manufacturing, Pharmaceutical Plants, Cleanrooms, Fiber Optics, Electronic Assembly, Electronic Warehousing, Circuit Assembly, Aerospace, CMOS chips , microprocessor , semiconductor , dish drivers , composites , LCD screen product , circuit product line , hospitals and Pharmaceutical industries , precision instrument etc
E) Characteristics 1 ) The anti-static mat is made up of two layers , the top layer dark green is static dissipative and the bottom Black layer in conductive . These ESD mats offer excellent resistance to oil, grease and most common solvents, hot solders and soldering irons. 2) Features :- On 4th June 2015, Commission Directive (EU) 2015/863 was published in the Official Journal of the European Union (OJEU) to include the phthalates ( BBP, DBP, DEHP and DIBP ) into ANNEX II of the RoHS Recast Directive. The new law restricts each phthalate to no more than 0.1% in each homogeneous material of an electrical product.
The anti static properties of mat are according with the relative requirements of SJ/T 10694-1996 . The surface resistance of static dissipative layer ( 1.0 x 10e6 ~ 10e9 Ω ) The surface resistance of conductive layer ( Below 1.0 x 10e6 Ω ) Volume resistance ( 1.0 x 10e6 ~ 10e9 Ω ) Surface triboelectric voltage of the static dissipative material < 200 V The time of static discharging below 100V should be less than 1 second . 3) Model No. : HTESD2GRN1X10S , 4) Compliant to GB/T14437-97 . 5) RoHS compliant . 6) Top Layer Material : Dark Green ( 100% Natural Rubber ) , Bottom Layer Material : Black ( 100% Natural Rubber ). 7) Surface Resistivity : a) Top ( 1.0 × 10 ⁷ ~ 1.0 × 10⁹ Ohms ) b) Bottom ( 1.0 × 10 ²~ 1.0 × 10 ⁶Ohms ) 8) Hardness ( IRHD , Micro Hardness Tester Wallace ) a) Top Green Layer : 70 ± 5° ( Shore A ) b) Bottom Black layer : 70 ± 5° ( Shore A ) 9) Overall Thickness : 2 ± 0.10 mm 10) Surface Finishing : Glossy ( Shining ) only
F) Specification 1) Model No. : HTESD2GRN1X10S , ~2mm ( Thickness ) x 1,000mm ( 1m ) ( Width ) x 10,000mm ( 10m ) ( length ) / roll , weight around 30kgs / roll , Shining / Glossy Dark Green
SHINING / GLOSSY
Disclaimer : * Note : Users need to evaluate suitability for their industries use ( applications ) before placing order from us .
Model No. : HTESD2GRN1X10S
Scan for RoHS 1 & 2 Test Report
** The photograph may not clearly reflect the exact color as listed due to the camera, the lighting and other factors such as your screen settings, and color may vary slightly due to the color calibration of each individual monitor