H) Order procedures 1) Cash & Carry ( ex-factory )
2) Formal PO issuance :- Step 1 ) , Issue PO and e-mail to ( email@example.com ) . ( follow quotation number above in your PO , Leadtime : Within 1 ~ 7 working days ) ( * subject to GSe stock level )
Step 2 ) Contact / e-mail GSe Sales office for proforma invoice and payment arrangement in advance before collection . Disclaimer : * Note : Users need to evaluate suitability for their industries use ( applications ) before placing order from us . The Information provided on this website best advise our customers corresponds to current electrical matting standards . In the individual case it is the sole responsibility of the customer to evaluate requirements , in particular if specified properties are sufficient for use .
A) Product Name Model : GS-MV ( Medium Voltage ) , Corrugated Switchboard Matting / Non Conductive Switchboard Mat / Dielectric / Medium Voltage Insulation Rubber Mat
B) Raw Material : NATURAL RUBBER ( NR ) BASE POLYMER
C) Purpose Switchboard matting is a non-conductive high density rubber compound engineered to prevent electric shock around high voltage equipment. The non-conductive rubber compound creates an insulating barrier between the electrical source and ground.
D) Scope Our GS-MV ( Medium Voltage ) is under IEC 61111:2009 Class 2 , Ideal for Dielectric Voltage / Withstand Voltage : 30,000 VAC and Recommended Maximum use Voltage : 17,000 VAC ( High Voltage Switchboard Matting )
E) Characteristics 1) Brand : GSE 2) Model : GS-MV ( Medium Voltage ), Switchboard Matting / Medium Voltage Insulation Rubber Mat 3) Top Surface - Anti Slip Corrugated , with anti slip Corrugated surface to provide safe working environment , pattern surface “grabs” the bottom of footwear, improving traction and safe from slippery . 4) Colour : Black 5) Test Certificate : TNBR/HVLT-2019-10/001 ( BS EN 61111 : 2009 Clause 126.96.36.199 ) 6) Product Compliance Status :-
A) BS EN 61111 Clause 188.8.131.52 Class 2 , Voltage Withstand Test
B) Comply to RoHS I & II ( RoHS Compliant Product ) , RoHS , short for Restriction of Hazardous Substances . On 4th June 2015, Commission Directive (EU) 2015/863 was published in the Official Journal of the European Union (OJEU) to include the phthalates ( BBP, DBP, DEHP and DIBP , these are used to soften PVC and Vinyl products ) into ANNEX II of the RoHS Recast Directive.
The new law restricts each phthalate to no more than 0.1% ( mg/kg = ppm ; 0.1wt% = 1,000ppm ) in each homogeneous material of an electrical product. 7) Specific gravity : ± 1.50 g/cm³ 8) Hardness : 60 ± 5 Shore A 9) Elongation : Min ± 250 % 10) Tensile Strength : Min ± 5 MPa
F) Specification 1) Nominal Thickness : 5mm A) Model : GS-MV ( Medium Voltage ) , Switchboard Matting, ( Black colour ) , 5mm Tk x 1,000mm (1 m ) Width x 6,000mm ( 6 m ) Length / roll ( Approximatel ~40kgs / pc )
" GENUINE / IDENTIFICATION MARK “
1) Model , Lot No. , Nominal Maximum Use Voltage , IEC 61111:2009 Class , Test Certificate Number and colour code labelling .