Black ESD Mat MALAYSIA

IVORY ESD MAT?

WHY DO WE NEED ANTI - STATIC PROTECTION?

WHY SHOULD WE BE CONCERNED ABOUT THE IMPACT OF ELECTRO-STATIC DISCHARGE?

WHY ANTI-STATIC CARPETING FOR YOUR FACILITY?

​REASON IS TO PREVENT TRIBOELECTRIC DAMAGING OUR MACHINES / EQUIPMENT / ELECTRONIC PARTS etc

ElectroStatic Discharge Materials ( ESD Rubber ) - European Union ( EU ) RoHS Directive 2002/95/EC Compliant
Copyright © GSE ONLINE SDN BHD ( 1116968-P ) ALL RIGHTS RESERVED
Ivory  ESD Mat
ESD RUBBER MAT MALAYSIA

A) Product Name
ESD Ivory Rubber Mat

B) Raw Material :
NBR + Synthetic Rubber

C) Purpose
To prevent equipment damage resulting from the triboelectric voltage of the static dissipative

D) Scope
Ideal for use for Workstations, Electronic Manufacturing, Pharmaceutical Plants, Cleanrooms, Fiber Optics, Electronic Assembly, Electronic Warehousing, Circuit Assembly, Aerospace, CMOS chips, microprocessor, semiconductor, dish drivers, composites, LCD screen products, circuit product lines, hospitals and Pharmaceutical industries, precision instrument etc

E) Characteristics
1 ) The anti-static mat is made up of two layers, the top layer ( hard ) is static dissipative and the bottom layer ( soft ) is conductive.
2) Features:-
The anti-static properties of mat are according to the relative requirements of SJ/T 10694-1996.
The surface resistance of static dissipative layer ( 1.0 x 10e6 ~ 10e9 Ω )
The surface resistance of the conductive layer ( Below 1.0 x 10e6 Ω )
Volume resistance ( 1.0 x 10e6 ~ 10e9 Ω )
The surface triboelectric voltage of the static dissipative material < 200 V
The time of static discharging below 100V should be less than 1 second.
3) Part / Model No. : ESD2YLW1X10D
4) Compliant to GB/T14437-97.
5) RoHS compliant.
6) Top Layer Material: Matt Yellow (Ivory) ( NBR Rubber ),
Bottom Layer Material: Black ( Synthetic Rubber ).
7) Surface Resistivity :
a) Top ( 1.0 × 10 ⁷ ~ 1.0 × 10⁹ Ohms ), above 1M Ohms
b) Bottom ( 1.0 × 10 ²~ 1.0 × 10⁶Ohms ), below 1M Ohms

8) Hardness ( IRHD, Micro Hardness Tester Wallace )
a) Top Ivory Layer: 70 ± 5° ( Shore A )
b) Bottom Black layer: 50 ± 5° ( Shore A )
9) Overall Thickness:  Minimum 2.00 mm
10) Surface Finishing: Matt ( Dull )​

F) Specification
1) Model No.: ESD2YLW1X10D , ~2mm ( Thickness ) x 1,000mm ( 1m ) ( Width ) x 10,000mm ( 10m ) ( length ) / roll , weight around 30kgs / roll 


G) Rate Offer & Order
​Disclaimer :
​* Note : Users need to evaluate suitability for their industries use ( applications ) before placing order from us .
Model No. : ESD2YLW1X10D
GSE ONLINE SDN BHD
** The photograph may not clearly reflect the exact color as listed due to the camera, the lighting and other factors such as your screen settings, and color may vary slightly due to the color calibration of each individual monitor
GSE ONLINE SDN BHD GSE ONLINE SDN BHD esd ivory mat Malaysia Yellow ESD Mat MALAYSIA Yellow ESD Mat MALAYSIA Ivory ESD Table Mat Quotation Malaysia Ivory ESD Mat MALAYSIA