Low Voltage (SBR10) Insulation Rubber Mat Malaysia :-

 Model :   SBR10 ( Low Voltage )
 Top Surface : Anti Slip Corrugated 
 IEC 61111:2009 : CLASS 0,
 Dielectric Test Voltage :  10kV ,
 Nominal Maximum Use Voltage : 1kV & Below

Copyright © GSE ONLINE SDN BHD ( 1116968-P ) ALL RIGHTS RESERVED

Disclaimer :
 ​* Note: Users need to evaluate suitability for their industry's use ( applications ) before placing an order from us.
 The Information provided on this website best advises our customers to correspond to current electrical matting standards.
 In the individual case, it is the customer's sole responsibility to evaluate requirements, mainly if specified properties are sufficient for use.​​


A) Product Name
Model : SBR10 ( Low Voltage ) , Anti-slip Corrugated Switchboard Matting / Non Conductive Switchboard Mat / Dielectric / Low Voltage Insulation Rubber Mat, IEC61111:2009 Class 0

B) Raw Material
Non-RoHS SBR/RECLAIMED NATURAL RUBBER BASE POLYMER

C) Purpose
Switchboard matting is a non-conductive high-density rubber compound engineered to prevent electric shock around high voltage equipment.
The non-conductive rubber compound creates an insulating barrier between the electrical source and the ground.

D) Scope
Our SBR10 ( Low Voltage ) is under IEC 61111:2009 Class 0 , Ideal for Dielectric Voltage / Withstand Voltage : 10,000 VAC and Recommended Maximum use Voltage : 1,000 VAC ( Low Voltage Switchboard Matting )

E) Characteristics
1) Brand: GSE ®
2) Model: SBR10 ( Low Voltage ), Switchboard Matting / Low Voltage Insulation Rubber Mat
3) Top Surface - Anti Slip Corrugated with the anti-slip Corrugated surface to provide a safe working environment, the pattern surface “grabs” the bottom of footwear, improving traction and safety from slippery.
4) Colour: Black
5) Test Certificate IEC61111:2009 Withstand Voltage 5.6.4.3:
Tested by 3rd Party Accredited Laboratory (TNB Labs)
6) Non-RoHS 2
​7) Product Compliance Status: -
A) BS EN 61111 Clause 5.6.4.3 Class 0, Voltage Withstand Test for 180 Seconds (3 Minutes)

F) Specifications
1) Nominal Thickness: 3mm
A) Brand: GSE™,  Model: SBR10, Switchboard Matting, Diamond, Black colour, 3mm Nominal Thickness x 1,000mm (1m) Width x 10,000mm (10m) Length/roll 



​​​​

                  ​
danger rubber sign
GSE ONLINE SDN. BHD. Contact GSE GSE ONLINE SDN. BHD.
TNB √ 
SBR10 (Low Voltage) Corrugated Switchboard Matting Malaysia SBR10 (Low Voltage) Corrugated Switchboard Matting Malaysia SBR10 CLASS 0 1000V 10,000V Label SBR10 (Low Voltage) Corrugated Switchboard Matting Quotation